The BMS Blivet is a high quality, extremely compact, ‘Plug & Play’ package sewage treatment system (plant) designed for populations from 20-5,000 PE. It is a completely prefabricated portable system that is delivered ‘ready to go’ with minimal civil works and is suitable for permanent, temporary or emergency use.

The Blivet also offers a class-leading lifetime/whole life cost due to its very low maintenance, power and spare parts requirements and is designed for a lifespan above 30 years.

The BMS Stormbreaker is a robust storm water Attenuation and Infiltration system with Agrément certification. It has a 94% void and is quick to install, requiring minimal cover even under roads. It is made of certified polypropylene in Ireland and allows maintenance-free installations without grit/silt entry. Designed using our 37 years of experience and expertise to achieve maximum efficiency, durability and performance.

BMS Drainmax Tunnels are high-quality storm water attenuation and infiltration system. It is lightweight and extremely easy/quick to install with maintenance free systems available. The semi-circular tunnels have a 100% buffering capacity and three times the storage volume of a conventional gravel ditch. Drainmax Tunnels are fully certified. Maintenance Free Drainmax solutions are available.

The BMS Recyclone is a unique “all in one” pre-fabricated package car/truck/vehicle wash water recycling system designed to recycle 100% of recovered vehicle wash water for continuous re-use. A Recyclone will reduce water use by up to 90% and can completely eliminate pollution, thus providing substantial financial and environmental benefits with same day commissioning. It can also eliminate the need for a discharge license.

BMS manufactures a full range of Petrol & Oil Interceptors (Separators) from 1,000 – 100,000 L including Full Retention, By-Pass & Forecourt Interceptors for all requirements. All BMS Interceptors are manufactured under an NSAI verified ISO 9001:2015 Quality Management System & to the European Standard; EN 858 1&2. BMS can match any inlet/outlet pipe size and offer a quick turnaround/free design advise.

The BMS Stormbreaker Defender is a low footprint interceptor (separator) capable of removing silt, particles and floating pollutants such as oil/hydrocarbons/debris and contaminated settling solids from surface or storm water flows. It can also be used before drain discharges direct in water courses to prevent pollution from silt and floating debris such as plastic bottles, bags, rags, cigarette butts etc.

The Aerotor® is a next generation Rotating Biological Contactor (RBC) (Biodisc) that combines fixed film reaction, active aeration, plug flow and intense surface area to yield a system that is three times more efficient than traditional RBC designs and has been installed in 1000+ locations worldwide over 35 years. The Aerotor has all the upsides of traditional RBCs such as process reliability, low operation, power and spare parts cost with none of the downsides such as large footprint, one sided/bridging growth issues & flow bypass during low/high flows.

BMS manufacture a comprehensive range of completely pre-fabricated GRP (Fibreglass) Pump Stations (Sumps) from 1000 l – 100,000 l capacity . All BMS Pump Stations are completely factory pre-fitted with guiderails/valves etc. They are available with or without separate valve chambers/24 hour emergency storage. They allow a far quicker installation and will save the costs/H&S risks/time associated with constructing and fitting a concrete sump on site.

BMS manufactures a large range of Fire Fighting Holding Tanks from 1,000 - 100,000 L including Steel Framed Tanks suitable for partial/fully above ground installation. All Fire Fighting Tanks are manufactured under an NSAI Verified ISO 9001:2015 Quality Management System.

BMS design/manufacture a comprehensive range of completely pre-fabricated GRP (Fibreglass) Holding Tanks or Storage Tanks from 1000 l – 100,000 l capacity. A large range of chemical resistant coatings are also available. BMS Holding/Storage Tanks can be used to store/hold water, sewage, wastewater and abrasive liquids. The tanks are also suitable as water storage tanks for firefighting, for surface water management e.g. attenuation and SuDS and for rain water harvesting. The tanks save the cost of constructing concrete tanks on site and are ‘delivered to site’ completely ‘ready to go’.