Customer Question:

What is the difference between the Effluent Standard and the Stream Standard in sewage treatment?

Explanation of the Two Standards:

1. Effluent Standard (Final Effluent Standard):

   • Refers to the quality of effluent that a wastewater treatment plant (WWTP) must produce.

   • Standards are based on a set maximum inlet load and are measured by parameters such as:

     • Flow

     • BOD (Biochemical Oxygen Demand)

     • Suspended Solids (SS)

     • Ammonia (NH4)

     • Nitrate (NO3)

     • Nitrite (NO2)

     • Total Nitrogen (TN)

     • Orthophosphate (OP)

     • Total Phosphate (TP)

   • For industrial effluent, additional parameters may apply.

   • Package sewage treatment focuses on normal domestic sewage or equivalent.

2. Stream Standard:

   • Refers to the quality of water in the watercourse receiving the treated effluent.

   • Standards are determined based on the watercourse's use, e.g.:

     • Drinking water

     • Bathing

     • Fishery purposes

   • If a watercourse serves sensitive purposes, stricter Stream Standards will apply, resulting in higher Effluent Standards for the WWTP.

How the Standards Are Related:

• Effluent Standard Derived from Stream Standard:

  • Effluent standards for a WWTP are set by working backward from the Stream Standard.

  • Example:

    • If the receiving water body is a fishery or a drinking water source, the Effluent Standard will include strict limits on BOD, SS, NH4, TN, and TP.

• Dilution and Biodegradation:

  • A watercourse’s assimilative capacity (ability to dilute and biodegrade pollutants) influences its Stream Standard.

  • If significant dilution or biodegradation can occur, the Stream Standard may be lower, allowing for less stringent Effluent Standards.

Key Concepts:

By understanding these standards, sewage treatment plants can ensure compliance with environmental regulations and protect watercourse ecosystems.

About BMS

BMS is a quality manufacturer of package products for wastewater and stormwater treatment:

• Established: 1986

• Global Reach: Exported to over 50 countries.

• Family Business: A third-generation company with deep expertise.

BMS Product Range

BMS provides a wide array of surface water and wastewater treatment products, including:

• Attenuation systems

• Interceptors

• Holding tanks (chemical-resistant options available)

• Hydrobrakes

• Rainwater harvesting tanks

• Vortex silt/oil/debris separators

• Fully fitted pumping stations

• Recyclone: A plug & play vehicle wash water recycling system

View the full product catalogue here

Additional Services by BMS

• Free Design Service: For sewage treatment, pump stations, and surface water management.

• Operation and Maintenance: Full services for existing installations, including repair, advice, and testing.

• Free CPD Presentations: Available for sewage treatment and surface water management, delivered at your location.

We would be delighted to discuss any requirements you might have, and we are available to meet you at your convenience.  Contact us today.

© Butler Manufacturing Services 2024.