BMS Drainmax Tunnels are high-quality storm water attenuation and infiltration system. It is lightweight and extremely easy/quick to install with maintenance free systems available. The semi-circular tunnels have a 100% buffering capacity and three times the storage volume of a conventional gravel ditch. Drainmax Tunnels are fully certified. Maintenance Free Drainmax solutions are available.

The BMS Recyclone is a unique “all in one” pre-fabricated package car/truck/vehicle wash water recycling system designed to recycle 100% of recovered vehicle wash water for continuous re-use. A Recyclone will reduce water use by up to 90% and can completely eliminate pollution, thus providing substantial financial and environmental benefits with same day commissioning. It can also eliminate the need for a discharge license.

BMS manufactures a full range of Petrol & Oil Interceptors (Separators) from 1,000 – 100,000 L including Full Retention, By-Pass & Forecourt Interceptors for all requirements. All BMS Interceptors are manufactured under an NSAI verified ISO 9001:2015 Quality Management System & to the European Standard; EN 858 1&2. BMS can match any inlet/outlet pipe size and offer a quick turnaround/free design advise.

The BMS Stormbreaker Defender is a low footprint interceptor (separator) capable of removing silt, particles and floating pollutants such as oil/hydrocarbons/debris and contaminated settling solids from surface or storm water flows. It can also be used before drain discharges direct in water courses to prevent pollution from silt and floating debris such as plastic bottles, bags, rags, cigarette butts etc.

BMS have designed a range of static grease traps, which require no power and very low maintenance but are highly effective.  BMS Grease Traps have been designed to suit the needs of catering facilities large and small such as restaurants, delis, fast food outlets and large kitchens such as hotels, along with the food and meat processing industries and are compliant with the current EU guidelines EN 1825 1&2.

BMS manufactures a large range of Fire Fighting Holding Tanks from 1,000 - 100,000 L including Steel Framed Tanks suitable for partial/fully above ground installation. All Fire Fighting Tanks are manufactured under an NSAI Verified ISO 9001:2015 Quality Management System.

BMS offer a range of rainwater harvesting tanks from 3 to 100,000 L with/without filters both in and outside the tank to suit any requirement of roof size from domestic to commercial to store rainwater. Rainwater Tanks are available for order for individual premises or for bulk supply to rainwater harvesting system installers. Rainwater is Ireland’s most abundant resource so why not take advantage of it and reduce your commercial water rates charge?

Silt Traps are normally installed in areas where high silt run off can occur such as at car & truck washes. The BMS range of GRP Silt Traps provides a simple and effective solution that prevents the grit/silt from blocking gullies and pipes in areas in which vehicles are being washed. BMS Silt Traps are available in a variety of sizes to suit your requirements.