Submersible Grinder Pumps (Multicut)
MultiCut submersible pumps are ideally suited for sewage and waste disposal in residential areas, such as housing estates, holiday parks or for individual houses.
Multicut pumps are ideal for mounting in areas remote from municipal infrastructure such as; motorway service stations and rural communities/ farms etc. One of the main advantages of a Multicut pumping system is that through the use of small bore pipework pumping over long distances it is possible to follow the natural contours of the ground.
The resultant savings as opposed to conventional large diameter pumping mains are considerable.
Multistream pumps can be supplied in both explosion proof (UFK) and non-explosion proof (UAK) versions and are highly efficient.
Product Highlights
↘ Cutting rotor with stirring effect
↘ External adjustable cutting mechanism
↘ Controllable Oil Chamber
↘ Plug type cable connection
↘ SiC mechanical seal independent of rotation
↘ Moisture sealed cable inlet
↘ Built-in motor protection
Performance Table & Indicative Uses of Multistream Pumps:
| Usual Application | Discharge Branch | Hmax | Qmax |
|---|---|---|---|
| For sewage disposal for Single Houses | DN 32 | 17m | 16m3/h |
| For Sewage disposal from medium to large developments | DN 32 | 55m | 20m3/h |
Recommended for:
Effluent containing solids or long-fibre type components
Effluent containing faeces
Domestic effluent without faeces
Mechanically cleaned effluent.
Features
Cutting rotor with stirring effect
External adjustable cutting mechanism
Controllable Oil Chamber
Plug type cable connection
SiC mechanical seal independent of rotation
Moisture sealed cable inlet
Built-in motor protection
MultiCut Cutting System
The unique MultiCut cutting system ensures maximum operational safety along with outstanding delivery characteristics. The cutter blade is made of hardened stainless steel and has a three bladed knife configuration. The cutter blade will macerate all coarse materials in the watewater with more than 62,000 cutting movements per minute. Multicut pumps also have in built intelligent trash rejection technology where non grindable solids are rejected instead of blocking the pump. The cutting is located before the pump hydraulics, this means that large solids are rejected before they can damage the pump. In addition the grooved design of the cutter plate makes the cutter self cleaning. The cutter can easily be adjusted during maintenance back to optimal position if it has moved for any reason during use.
The Will It Grind series of videos from Jung Pumpen shows a Multicut System in operation grinding jeans, bubble wrap, rubber chickens and more.