MultiStream pumps are suitable for handling effluent or sewage in municipal and industrial pumping stations as well as in surface water drainage applications & rainwater reservoirs.
The adjustable axial gap of Multistream pumps means that if abrasion has taken place the single screw can be easily readjusted to ensure optimal efficiency when the pumps are being serviced. The smaller pumps in the Multistream range have also been used very successfully as portable units in emergency flooding situations.
Multistream pumps can be supplied in both explosion proof (UFK) and non-explosion proof (UAK) versions and are highly efficient.
- effluent which contains fibrous matter & solids
- mixed (combined) wastewater
- raw effluent
- raw sludge
- Adjustable single channel impellor
- Connection in PN6/PN10
- Safe to dry run
- Controllable Oil Chamber
- Plug type cable connection
- SiC mechanical seal independent of rotation
- Moisture sealed cable inlet
- Built-in motor protection
Performance Table & Indicative Uses of Multistream Pumps:
|Normal Use||Discharge Branch||Free Passage||Rpm||Hmax||Qmax|
|Drainage/Flooding & civil emergency||DN 65||40mm||2800rpm||27m||70m3/h|
|Communal/Industrial Pumping Stations with high delivery heads||DN 80 / 100||70mm||2800rpm||64m||280m3/h|
|Communal/Industrial Pump Stations & in rainwater reservoirs||DN 80 / 100||70mm||1400rpm||22m||190m3/h|
|Communal/Industrial Pump Stations with high flow rates & in rainwater reservoirs||DN 100 / DN 150||100mm||1400rpm||39m||520m3/h|
|Communal/Industrial Pump Stations with high flow rates & in rainwater reservoirs||DN 200||100mm||1400rpm||35m||540m3/h|